PROVISIONAL ACCEPTABLE MEANS OF COMPLIANCE STANDARD IZ AT ION OF APPROVED AEROPLANE FLIGHT MANUALS AMENDMENT No. 1 - 10 DECEMBER 1968 1. AMEND the last sentence of paragraph 7.5 Conditions associated with graphs to read "speeds, including the power-off stalling speeds, should be stated in terms of IAS. The power-off ltrg" stalling speeds should be stated in terms of EAS." 2. ADD a new sub-paragraph 7.8.1 after the paragraph 7.8 Form of presentation of perform- ance to read - "7.8.1 Genera 1 inf orma t iontt. 3. AMEND the numbering of the existing sub-paragraph 7.8.1 A-i- meter error correction curves to read "7.8.1.1 Airspeed indicator and altimeter error correction curves" and AMEND the last sentence of this sub-paragraph to read "This is illustrated in Figure 2.1. ". 4. 4 a new sub-paragraph 7.8.1.2 after the subparagraph 7.8.1.1 - Airseed indicator and altimeter error correction curves to read "7.8.1.2 Power-off l"g" stalling speeds 7.8.1.2.1 A graph should be provided in which the power-off ll'g" stalling speeds are plotted as the ordinates with the aeroplane weight as the abscissa for the configura- tions cf wing flaps and other high-lift produding devices, if applicable and landing gear used in the operation. The power-off lttg" stalling speeds should be in terms of EAS. This is illustrated in Figure 2.2. 7.8.1.2.2 A graph analogical to that mentioned at 7.8.1.2.1 should be provided, illustrating the power-off stalling speeds in terms of IAS. This graph should be included, with the appropriate explanatory text, in Section 8 - Appendices.". 5. AMEND the existing sub-paragraph 7.8.4 Take-off field lengths to read "7.8.4 Take-of f field lengths 7.8.4.1 Characteristic speeds 7.8.4.1.1 A graph should be provided to enable the IAS value on the ground ofthe speed V1, appropriate to the V/VR ratio, the weight, and, if applicable, the altitude and temperature, to be obtained for dry runway conditions. This is illustrated in Figure 5.
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ