Page:
INFO
Text
Editions
Modifies
Links To
Links From
In Catalogs
Doc 8697 Third Edition Amendment No. 1 11/12/20 AERONAUTICAL CHART MANUAL THIRD EDITION 2016 AMENDMENT NO. 1 1. To incorporate this amendment, insert the following new and replacement pages dated 11/12/20 Pages 7-13-7 to 7-13-9 and 7-14-5 to 7-14-6 and 2. Record the entry of this Amendment on page iii.
Chapter 7. Preparation of specific charts 7-13-7 Annex 4 reference Details Drafting Illustration l position of runway visual range RVR observation sites m approach and runway lighting n location and type of the visual approach slope indicator systems and their nominal approach slope angle or angles, minimum eye height or heights over the threshold of the on-slope signal or signals and where the axis of the system is not parallel to the runway centre line, the angle and direction of the displacement, i.e. left or right See specimen chart 11 for runway lighting o relevant communication facilities listed with their channels and, if applicable, logon address p obstacles to taxiing q aircraft servicing areas and buildings of operations significance r VOR checkpoint and radio frequency of the aid concerned Guidance on the selection of VOR aerodrome checkpoints will be found in Annex 10, Volume I, Attachment E to Part I. 11/12/20 No. 1
7-13-8 Aeronautical Chart Manual Annex 4 reference Details Drafting Illustration s any part of the depicted movement area permanently unsuitable for aircraft, clearly identified as such. t where established, locations and all ground areas where it is safe for aeroplanes with folding wing tips to operate with wing tips extended. 13.6.2 In addition to the items a to s, Annex 4 reference 13.6.1 relating to heliports, the chart must show a heliport type Heliport types are identified in Annex 14, Volume II as surface level, elevated or helideck. b touchdown and lift-off area including dimensions, slope, type of surface and bearing strength in tonnes c final approach and take-off area including type, magnetic bearing, designation number where appropriate, length, width, slope and type of surface d safety area including length, width and type of surface e helicopter clearway including length and ground profile f significant obstacles including type and elevation of the top of the obstacles to the nearest next higher metre or foot 11/12/20 No. 1
Chapter 7. Preparation of specific charts 7-13-9 Annex 4 reference Details Drafting Illustration g visual aids for approach procedures, marking and lighting of final approach and take-off area, and of touchdown and lift-off area h declared distances for heliports, where relevant, including 1 take-off distance available 2 rejected take-off distance available 3 landing distance available. 11/12/20 No. 1
EXAMPLE
To view full book Buy access
EXAMPLE
To view full book Buy access
Table Of Contents